6308C3

HPS – High Performance Standard 6300 Series Single Row Deep Groove Ball Bearing

Item #100761230

Auto Replenish

each One-time purchase

Product Details

Deep groove radial bearings are manufactured as open type bearings for oil or grease lubrication. They are also available with metal shields and/or seals for use where moderate contamination is present in the operation.

Complies with RoHS restrictions on the use of certain hazardous substances in electrical and electronic equipment
For deep groove ball bearings, if the bearing load is too small during operation, slippage occurs between the balls and raceways, which may result in smearing
The higher the weight of balls and cage, the higher this tendency becomes, especially for large bearings
If very small bearing loads are expected, please contact Applied® for selection of an appropriate bearing

Specifications

I.D.	40 mm
Precision	Standard
Static Load Rating [Max]	5,400.00 lbf
Corner Radius [Min]	1.50 mm
Seal Material	None
Ball Material	Steel
Limiting Speed - Oil	9000 rpm
Bearing Type	Radial
Radial Internal Clearance Specification	Greater Than Normal Clearance
Width	23 mm
Cage Material	Pressed Steel
Dynamic Load Rating	9,560.00 lbf
Limiting Speed - Grease	7500 rpm
Locking Device	No Locking Device
Seal Type	Unsealed
Inner Ring Width	23 mm
Precision Level	Standard (ABEC 1)
No. in Set	Single Bearing
Inch/Metric	Metric Bore
Outer Ring Width	23 mm
Capacity	Standard Capacity
icNumber	7696006
Cage Type	Metal
Snap Ring	No Snap Ring
Contact Angle	0°
Material	Steel
Preload Level	None
O.D.	90.0000 mm
Rows of Balls	Single
O.D. Type	Straight
Lubricant	Mul-Temp SRL
Radial Internal Clearance	C3
Enclosure	Open
Bore Type	Round Bore
Weight	1.396 LB
EAN or UPC	29176016875