6304

HPS – High Performance Standard 6300 Series Single Row Deep Groove Ball Bearing

Item #100760967

Auto Replenish

each One-time purchase

Product Details

Deep groove radial bearings are manufactured as open type bearings for oil or grease lubrication. They are also available with metal shields and/or seals for use where moderate contamination is present in the operation.

Complies with RoHS restrictions on the use of certain hazardous substances in electrical and electronic equipment
For deep groove ball bearings, if the bearing load is too small during operation, slippage occurs between the balls and raceways, which may result in smearing
The higher the weight of balls and cage, the higher this tendency becomes, especially for large bearings
If very small bearing loads are expected, please contact Applied® for selection of an appropriate bearing

Specifications

Material	Steel
No. in Set	Single Bearing
I.D.	20 mm
Dynamic Load Rating	3,580.00 lbf
Width	15 mm
Contact Angle	0°
Outer Ring Width	15 mm
Preload Level	None
Inch/Metric	Metric Bore
Rows of Balls	Single
Limiting Speed - Grease	14000 rpm
Cage Material	Pressed Steel
Seal Type	Unsealed
Lubricant	Oil Preservative
Precision	Standard
Snap Ring	No Snap Ring
Bearing Type	Radial
Static Load Rating [Max]	1,770.00 lbf
Bore Type	Round Bore
Seal Material	None
O.D. Type	Straight
Corner Radius [Min]	1.10 mm
Cage Type	Metal
Capacity	Standard Capacity
Ball Material	Steel
Limiting Speed - Oil	17000 rpm
Enclosure	Open
Precision Level	Standard (ABEC 1)
Locking Device	No Locking Device
Radial Internal Clearance Specification	Normal Clearance
O.D.	52.0000 mm
Inner Ring Width	15 mm
icNumber	7699302
Radial Internal Clearance	Normal
Weight	0.317 LB
EAN or UPC	29176016486