6303DDUC3

HPS – High Performance Standard 6300 Series Single Row Deep Groove Ball Bearing

Item #100760932

Auto Replenish

each One-time purchase

Product Details

Deep groove radial bearings are manufactured as open type bearings for oil or grease lubrication. They are also available with metal shields and/or seals for use where moderate contamination is present in the operation.

Complies with RoHS restrictions on the use of certain hazardous substances in electrical and electronic equipment
For deep groove ball bearings, if the bearing load is too small during operation, slippage occurs between the balls and raceways, which may result in smearing
The higher the weight of balls and cage, the higher this tendency becomes, especially for large bearings
If very small bearing loads are expected, please contact Applied® for selection of an appropriate bearing

Specifications

I.D.	17 mm
Dynamic Load Rating	3,060.00 lbf
Bearing Type	Radial
Cage Type	Metal
Radial Internal Clearance Specification	Greater Than Normal Clearance
Rows of Balls	Single
Snap Ring	No Snap Ring
Precision	Standard
icNumber	7695875
Inch/Metric	Metric Bore
Enclosure	Double Sealed
Width	14 mm
Corner Radius [Min]	1.00 mm
Limiting Speed - Grease	11000 rpm
O.D. Type	Straight
Contact Angle	0°
Radial Internal Clearance	C3
Cage Material	Pressed Steel
Inner Ring Width	14 mm
Material	Steel
Preload Level	None
Precision Level	Standard (ABEC 1)
Capacity	Standard Capacity
Limiting Speed - Oil	18000 rpm
Outer Ring Width	14 mm
Bore Type	Round Bore
Seal Material	Buna-N
Lubricant	Mul-Temp SRL
O.D.	47.0000 mm
Locking Device	No Locking Device
Static Load Rating [Max]	1,490.00 lbf
No. in Set	Single Bearing
Ball Material	Steel
Seal Type	Contact Seals
Weight	0.249 LB
EAN or UPC	29176065408