6302ZZC3

HPS – High Performance Standard 6300 Series Single Row Deep Groove Ball Bearing

Item #100760894

Auto Replenish

each One-time purchase

Product Details

Deep groove radial bearings are manufactured as open type bearings for oil or grease lubrication. They are also available with metal shields and/or seals for use where moderate contamination is present in the operation.

Complies with RoHS restrictions on the use of certain hazardous substances in electrical and electronic equipment
For deep groove ball bearings, if the bearing load is too small during operation, slippage occurs between the balls and raceways, which may result in smearing
The higher the weight of balls and cage, the higher this tendency becomes, especially for large bearings
If very small bearing loads are expected, please contact Applied® for selection of an appropriate bearing

Specifications

I.D.	15 mm
Radial Internal Clearance	C3
icNumber	7695846
Static Load Rating [Max]	1,220.00 lbf
Rows of Balls	Single
Enclosure	Double Shielded
Capacity	Standard Capacity
Locking Device	No Locking Device
Limiting Speed - Oil	20000 rpm
Preload Level	None
Cage Material	Pressed Steel
Material	Steel
Ball Material	Steel
Cage Type	Metal
Corner Radius [Min]	1.00 mm
Snap Ring	No Snap Ring
Dynamic Load Rating	2,570.00 lbf
Precision	Standard
O.D.	42.0000 mm
Width	13 mm
Lubricant	Mul-Temp SRL
Inch/Metric	Metric Bore
Outer Ring Width	13 mm
No. in Set	Single Bearing
Seal Type	Non-Contact Seals
Bore Type	Round Bore
Contact Angle	0°
O.D. Type	Straight
Limiting Speed - Grease	17000 rpm
Seal Material	Metal
Precision Level	Standard (ABEC 1)
Bearing Type	Radial
Radial Internal Clearance Specification	Greater Than Normal Clearance
Inner Ring Width	13 mm
Weight	0.181 LB
EAN or UPC	29176016370