6213DDUC3

HPS – High Performance Standard 6200 Series Single Row Deep Groove Ball Bearing

Item #100761500

Auto Replenish

each One-time purchase

Product Details

Deep groove radial bearings are manufactured as open type bearings for oil or grease lubrication. They are also available with metal shields and/or seals for use where moderate contamination is present in the operation.

Complies with RoHS restrictions on the use of certain hazardous substances in electrical and electronic equipment
For deep groove ball bearings, if the bearing load is too small during operation, slippage occurs between the balls and raceways, which may result in smearing
The higher the weight of balls and cage, the higher this tendency becomes, especially for large bearings
If very small bearing loads are expected, please contact Applied® for selection of an appropriate bearing

Specifications

Cage Material	Pressed Steel
icNumber	7696038
Ball Material	Steel
Seal Material	Buna-N
Lubricant	Mul-Temp SRL
O.D.	120.0000 mm
Dynamic Load Rating	12,814.00 lbf
Radial Internal Clearance	C3
Capacity	Standard Capacity
Inner Ring Width	23 mm
Enclosure	Double Sealed
Precision Level	Standard (ABEC 1)
Snap Ring	No Snap Ring
Inch/Metric	Metric Bore
Locking Device	No Locking Device
Limiting Speed - Grease	3600 rpm
O.D. Type	Straight
Bearing Type	Radial
Radial Internal Clearance Specification	Greater Than Normal Clearance
Seal Type	Contact Seals
Preload Level	None
Material	Steel
Cage Type	Metal
No. in Set	Single Bearing
Width	23 mm
Rows of Balls	Single
I.D.	65 mm
Corner Radius [Min]	1.50 mm
Limiting Speed - Oil	6300 rpm
Outer Ring Width	23 mm
Contact Angle	0°
Precision	Standard
Static Load Rating [Max]	8,992.00 lbf
Bore Type	Round Bore
Weight	2.205 LB
EAN or UPC	29176064616