6211DDUC3

HPS – High Performance Standard 6200 Series Single Row Deep Groove Ball Bearing

Item #100761392

Auto Replenish

each One-time purchase

Product Details

Deep groove radial bearings are manufactured as open type bearings for oil or grease lubrication. They are also available with metal shields and/or seals for use where moderate contamination is present in the operation.

Complies with RoHS restrictions on the use of certain hazardous substances in electrical and electronic equipment
For deep groove ball bearings, if the bearing load is too small during operation, slippage occurs between the balls and raceways, which may result in smearing
The higher the weight of balls and cage, the higher this tendency becomes, especially for large bearings
If very small bearing loads are expected, please contact Applied® for selection of an appropriate bearing

Specifications

Seal Material	Buna-N
O.D.	100.0000 mm
Snap Ring	No Snap Ring
Lubricant	Mul-Temp SRL
Capacity	Standard Capacity
Locking Device	No Locking Device
Limiting Speed - Grease	4300 rpm
No. in Set	Single Bearing
Limiting Speed - Oil	7500 rpm
Preload Level	None
Inner Ring Width	21 mm
Precision Level	Standard (ABEC 1)
Precision	Standard
Contact Angle	0°
Cage Type	Metal
Cage Material	Pressed Steel
Dynamic Load Rating	9,779.00 lbf
Outer Ring Width	21 mm
Radial Internal Clearance	C3
Inch/Metric	Metric Bore
Width	21 mm
Ball Material	Steel
Rows of Balls	Single
Material	Steel
icNumber	7695914
Seal Type	Contact Seals
Bore Type	Round Bore
O.D. Type	Straight
Corner Radius [Min]	1.50 mm
Radial Internal Clearance Specification	Greater Than Normal Clearance
Static Load Rating [Max]	6,587.00 lbf
Enclosure	Double Sealed
Bearing Type	Radial
I.D.	55 mm
Weight	1.338 LB
EAN or UPC	29176064517