6200ZZC3

HPS – High Performance Standard 6200 Series Single Row Deep Groove Ball Bearing

Item #100760829

Auto Replenish

each One-time purchase

Product Details

Deep groove radial bearings are manufactured as open type bearings for oil or grease lubrication. They are also available with metal shields and/or seals for use where moderate contamination is present in the operation.

Complies with RoHS restrictions on the use of certain hazardous substances in electrical and electronic equipment
For deep groove ball bearings, if the bearing load is too small during operation, slippage occurs between the balls and raceways, which may result in smearing
The higher the weight of balls and cage, the higher this tendency becomes, especially for large bearings
If very small bearing loads are expected, please contact Applied® for selection of an appropriate bearing

Specifications

Seal Material	Metal
icNumber	7695963
O.D. Type	Straight
Inner Ring Width	9 mm
Static Load Rating [Max]	537.00 lbf
Dynamic Load Rating	1,150.00 lbf
Lubricant	Mul-Temp SRL
Preload Level	None
Limiting Speed - Grease	24000 rpm
Inch/Metric	Metric Bore
Bore Type	Round Bore
Corner Radius [Min]	0.30 mm
Material	Steel
Seal Type	Non-Contact Seals
I.D.	10 mm
Bearing Type	Radial
No. in Set	Single Bearing
O.D.	30.0000 mm
Cage Type	Metal
Locking Device	No Locking Device
Width	9 mm
Precision	Standard
Rows of Balls	Single
Ball Material	Steel
Capacity	Standard Capacity
Radial Internal Clearance	C3
Contact Angle	0°
Enclosure	Double Shielded
Limiting Speed - Oil	30000 rpm
Snap Ring	No Snap Ring
Radial Internal Clearance Specification	Greater Than Normal Clearance
Cage Material	Pressed Steel
Outer Ring Width	9 mm
Precision Level	Standard (ABEC 1)
Weight	0.066 LB
EAN or UPC	29176013638