Skip to content Skip to navigation menu
7400-PJD Heavy Series Duplex Ball Bearing

7417PJDU

7400-PJD Heavy Series Duplex Ball Bearing
Item #101169053
  • Single Row Angular Contact Bearing, 85 mm ID x 210 mm OD x 52 mm Wide, Open, Standard Precision (ABEC 1), Brass / Bronze Cage, Normal Clearance (C0), 40° Contact Angle
7400-PJD Heavy Series Duplex Ball Bearing
Price Unavailable
Price Unavailable
Pricing is unavailable at this time. Please contact Customer Service for assistance.
Online Ordering Restricted
Please contact Customer Service for assistance.
Contact Customer Service
    Shipment Options
  • Single Row Angular Contact Bearing, 85 mm ID x 210 mm OD x 52 mm Wide, Open, Standard Precision (ABEC 1), Brass / Bronze Cage, Normal Clearance (C0), 40° Contact Angle

features

  • MRC angular contact bearings with a PJ suffix have one heavy race shoulder on the outer ring, opposing one heavy race shoulder and on recessed race shoulder on the inner ring. Because of this construction, it is possible for this bearing to incorporate a
  • 7000-PJ bearings are particularly suitable for positions where the thrust is always present in one direction. It should not be used where the bearing is subjected to radial load only, or combined radial and thrust load where the radial load is predominant
  • 7000-PJ bearings are available with either peressed brass or machined brass, ball centered cages. The low shoulder diameters on the nonthrust sides of inner and outer rings, combined with large clearances between the land diameters and the cage, allow fo
  • ABEC Grade 3 bore tolerances reduce the range of interference fits between the shaft and bearing bore. These tighter tolerances result in closer control of preload and minimize the risk of thermal runaway.
  • 7400-PJ and PJD Series bearings are similar to the 7200-PJ and 7300-PH Series but are heavier sectioned and are used for very heavy thrust loads or combined radial and thrust loads where thrust is predominant.
Series 7400PJ
O.D. Type Cylindrical
Locking Device No Locking Device
Inch/Metric Metric
Origin Single Row Angular Contact
Enclosure Open
Bearing Type Unmounted, Angular Contact
Static Load Rating 166 kN
Flush Ground Yes
Material Bearing Steel
I.D. 3.35 in, 85 mm
Contact Angle 40 Degree
Width 2.05 in, 52 mm
Bore Type Cylindrical
Cage Material Brass
O.D. 8.27 in, 210 mm
Cage Type Metal
Outer Ring Width 2.05 in, 52 mm
No. in Set Single Bearing
Seal Type Unsealed
Lubricant Oil Preservative
Dynamic Load Rating 190 kN
icNumber 7696682
Preload Level Light
Precision Level Standard (ABEC 1)
Radial Internal Clearance Specification Normal Clearance
Precision Standard
Limiting Speed - Grease 2900 rpm
Radial Internal Clearance Normal
Seal Material None
Inner Ring Width 2.05 in, 52 mm
Capacity Standard Capacity
Snap Ring No Snap Ring
Limiting Speed - Oil 3800 rpm
Ball Material Steel
Static Load Rating [Max] 41800 lbf
Internal Design Universal Mounting
Temperature Range [Max] 450 °F
Rows of Balls Single
Fillet Radius 3 mm
Weight 20.735 LB
EAN or UPC 97741018616
We're here for you
with Service Centers across the country -
We have your back
Close Compare List Open Compare List Toggle

Product Comparison