Find a Service Center
Alternate Products
- Single Row Angular Contact Bearing, 140 mm ID x 250 mm OD x 42 mm Wide, Open, Standard Precision (ABEC 1), Brass / Bronze Cage, Normal Clearance (C0), 40° Contact Angle, Duplex (2) Set
features
- MRC 7000-P Series bearings are similar in design to 7000 Series bearings, but the 7000-P Series bearings have features that give them a greatly increased thrust capacity. They are especially recommended for those applications where maximum thrust capacity
- This heavy-duty angular contact bearing series is designed with an optimum ball complement and race groove depth and have a 40° contact angle
- 7000-P bearings are restricted to applications involving primarily thrust loads. They should not be used where the bearing will be subjected to radial load exclusively, or combined radial and thrust load where the radial load is predominant.
- Furnished in one-piece machined bronze, phenolic composition or special material riding ground OD of inner ring.
- 7200-P Light Series bearing are available in bore sizes ranging from 10 mm to 200 mm. They are used with heavy one-directional thrust loads, or combined radial and thrust loads where the thrust load is predominant.
| Temperature Range [Max] | 450 °F |
| Flush Ground | Yes |
| Lubricant | Oil Preservative |
| Enclosure | Open |
| Bore Type | Cylindrical |
| I.D. | 5.51 in, 140 mm |
| Radial Internal Clearance Specification | Normal Clearance |
| Seal Type | Unsealed |
| Origin | Single Row Angular Contact |
| Static Load Rating | 216 kN |
| Limiting Speed - Grease | 1800 rpm |
| Cage Type | Metal |
| Series | 7200P |
| Seal Material | None |
| Dynamic Load Rating | 199 kN |
| O.D. Type | Cylindrical |
| Snap Ring | No Snap Ring |
| Precision | Standard |
| Rows of Balls | Single |
| Cage Material | Brass |
| icNumber | 7699066 |
| Capacity | Standard Capacity |
| Material | Bearing Steel |
| No. in Set | Duplex Set |
| Precision Level | Standard (ABEC 1) |
| Contact Angle | 40 Degree |
| O.D. | 9.84 in, 250 mm |
| Internal Design | Universal Mounting |
| Ball Material | Steel |
| Inch/Metric | Metric |
| Static Load Rating [Max] | 48600 lbf |
| Inner Ring Width | 1.65 in, 42 mm |
| Locking Device | No Locking Device |
| Preload Level | Light |
| Outer Ring Width | 1.65 in, 42 mm |
| Fillet Radius | 2.5 mm |
| Bearing Type | Unmounted, Angular Contact |
| Radial Internal Clearance | Normal |
| Width | 1.65 in, 42 mm |
| Limiting Speed - Oil | 2600 rpm |
| Weight | 20.247 LB |
| EAN or UPC | 97741017138 |
