
- 40 mm ID x 90 mm OD x 1 7/16" Wide
- Open
- No Snap Ring
- Maximum Capacity
- Double Row Ball Bearing
features
- Has filling notches on one side to permit assembling the maximum number of balls into the bearing
- Contact angles converge outside the bearing
- All inner and outer rings have closure grooves
- Bearings may be equipped with seals, shields, snap rings or any combination
- Has very heavy radial capacity
- Thrust capacity in one direction with the ability to accommodate light thrust load in the reversing direction
- One-piece, heat-treated steel for maximum retention, snapped into place after the full quota of balls has been introduced between the inner and outer ring
- Used with heavy radial loads, two-directional thrust loads or a combination of both
Precision Level | Standard (ABEC 1) |
Outer Ring Width | 1.44 in, 36.5 mm |
Inch/Metric | Metric |
Snap Ring | No Snap Ring |
I.D. | 1.57 in, 40 mm |
Limiting Speed - Sealed | 5000 rpm |
Limiting Speed - Oil | 6700 rpm |
Precision | Standard |
Bore Type | Cylindrical |
Preload Level | C3 Axial Clearance |
Temperature Range [Max] | 450 °F |
icNumber | 7696606 |
Lubricant | Oil Preservative |
Rows of Balls | Double |
O.D. Type | Cylindrical |
Material | Bearing Steel |
Ball Material | Steel |
Radial Internal Clearance | Normal |
Bearing Type | Unmounted, Angular Contact |
Cage Type | Metal |
Static Load Rating | 65.5 kN |
Radial Internal Clearance Specification | Normal Clearance |
Inner Ring Width | 1.44 in, 36.5 mm |
Limiting Speed - Grease | 5000 rpm |
Seal Type | Unsealed |
Origin | Double Row Deep Groove |
Seal Material | None |
No. in Set | Single Bearing |
O.D. | 3.54 in, 90 mm |
Static Load Rating [Max] | 14,700.00 lbf |
Series | 5300M |
Width | 1.44 in, 36.51 mm |
Locking Device | No Locking Device |
Cage Material | Bearing Steel |
Fillet Radius | 1.5 mm |
Capacity | Maximum Capacity |
Contact Angle | 30 Degree |
Enclosure | Open |
Dynamic Load Rating | 67.1 kN |
Flush Ground | No |
Weight | 2.315 LB |
EAN or UPC | 97741014618 |
