
- 35 mm ID x 80 mm OD x 1 3/8" Wide
- Open
- No Snap Ring
- Maximum Capacity
- Double Row Ball Bearing
features
- Has filling notches on one side to permit assembling the maximum number of balls into the bearing
- Contact angles converge outside the bearing
- All inner and outer rings have closure grooves
- Bearings may be equipped with seals, shields, snap rings or any combination
- Has very heavy radial capacity
- Thrust capacity in one direction with the ability to accommodate light thrust load in the reversing direction
- One-piece, heat-treated steel for maximum retention, snapped into place after the full quota of balls has been introduced between the inner and outer ring
- Used with heavy radial loads, two-directional thrust loads or a combination of both
Cage Type | Metal |
Radial Internal Clearance | Normal |
Contact Angle | 30 Degree |
Precision | Standard |
Ball Material | Steel |
icNumber | 7696603 |
Snap Ring | No Snap Ring |
O.D. Type | Cylindrical |
Enclosure | Open |
Bore Type | Cylindrical |
Flush Ground | No |
I.D. | 1.38 in, 35 mm |
Inner Ring Width | 1.37 in, 34.9 mm |
Radial Internal Clearance Specification | Normal Clearance |
No. in Set | Single Bearing |
Seal Type | Unsealed |
Preload Level | C3 Axial Clearance |
Rows of Balls | Double |
Static Load Rating [Max] | 10,800.00 lbf |
Fillet Radius | 1.5 mm |
Seal Material | None |
Outer Ring Width | 1.37 in, 34.9 mm |
Precision Level | Standard (ABEC 1) |
Width | 1.38 in, 34.93 mm |
O.D. | 3.15 in, 80 mm |
Static Load Rating | 48 kN |
Cage Material | Bearing Steel |
Temperature Range [Max] | 450 °F |
Dynamic Load Rating | 52.3 kN |
Lubricant | Oil Preservative |
Locking Device | No Locking Device |
Series | 5300M |
Limiting Speed - Sealed | 5600 rpm |
Material | Bearing Steel |
Limiting Speed - Grease | 5600 rpm |
Limiting Speed - Oil | 7500 rpm |
Inch/Metric | Metric |
Origin | Double Row Deep Groove |
Bearing Type | Unmounted, Angular Contact |
Capacity | Maximum Capacity |
Weight | 1.68 LB |
EAN or UPC | 97741014403 |
