
- 50 mm ID x 90 mm OD x 1 3/16" Wide
- Open
- No Snap Ring
- Standard Capacity
- Double Row Ball Bearing
applications
- Recommended for applications where single-row bearings are inadequate, but radial loads are not so great as to suggest a filling-notch bearing
- Bearings will take heavy radial loads and axial loads equally in either direction
features
- Double-row ball bearings have contact angles that converge outside the bearing, thereby increasing resistance to misalignment
- No filling notches
- Both the inner and outer rings have closure grooves
- One-piece, heat-treated steel for maximum retention
- snapped into place after the full quota of balls has been introduced between the inner and outer ring
compliances
- 0
Limiting Speed - Grease | 4800 rpm |
Enclosure | Open |
Width | 30.163 mm |
Material | Steel |
No. in Set | Single Bearing |
O.D. | 90 mm |
Seal Type | Unsealed |
Locking Device | No Locking Device |
Fillet Radius | 1 mm |
Temperature Range [Max] | 450 °F |
Cage Type | Metal |
Contact Angle | 30° |
Limiting Speed - Oil | 6300 rpm |
Precision | Standard |
Precision Level | Standard (ABEC 1) |
Preload Level | None |
Bore Type | Round Bore |
Cage Material | Steel |
Radial Internal Clearance Specification | Normal Clearance |
Outer Ring Width | 1 3/16 in |
Snap Ring | No Snap Ring |
Rows of Balls | Double |
O.D. Type | Straight |
Seal Material | None |
Inch/Metric | Metric Bore |
icNumber | 7695975 |
Lubricant | Oil Preservative |
Ball Material | Steel |
Inner Ring Width | 1 3/16 in |
Bearing Type | Angular Contact |
Dynamic Load Rating | 11000 lbf |
I.D. | 50 mm |
Capacity | Standard Capacity |
Radial Internal Clearance | Normal |
Limiting Speed - Sealed | 4800 rpm |
Static Load Rating [Max] | 8770 lbf |
Origin | Double Row Deep Groove |
Weight | 1.543 LB |
EAN or UPC | 97741012089 |
