Find a Service Center
- 0.5 in Belt Pitch
- 2 in Belt Width
- 60 Number of Teeth
- 9.495 in Outside Diameter
- H Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Width Across Teeth | 2.343 in |
| Bushing Series | 3020 |
| Belt Pitch | 0.5 in |
| Outside Dia. | 9.495 in |
| Belt Width | 2 in |
| Type | A |
| No. of Teeth | 60 |
| Length Through Bore | 2 in |
| Belt Size | H |
| Material | Cast Iron |
| Hub Type | A |
| Pitch Diameter | 9.549 in |
| Bushing Type | Taper-Lock |
| Bore Range [Max] | 3 in |
| Bore Range [Min] | 0.875 in |
| Bore Type | Bushed |
| Finished Bore | N/A |
| Weight | 15.3 LB |
| EAN or UPC | 697950084046 |
