Find a Service Center
- 0.5 in Belt Pitch
- 1 in Belt Width
- 40 Number of Teeth
- 6.312 in Outside Diameter
- H Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Bushing Series | 2517 |
| Belt Size | H |
| Length Through Bore | 1.75 in |
| Belt Width | 1 in |
| Outside Dia. | 6.312 in |
| Bore Range [Min] | 0.5 in |
| Hub Projection | 0.188 in |
| Bore Type | Bushed |
| No. of Teeth | 40 |
| Width Across Teeth | 1.063 in |
| Pitch Diameter | 6.366 in |
| Bore Range [Max] | 2.5 in |
| Material | Cast Iron |
| Hub Type | B |
| Bushing Type | Taper-Lock |
| Finished Bore | N/A |
| Hub Dia. | 4.437 in |
| Belt Pitch | 0.5 in |
| Type | CF |
| Weight | 7.8 LB |
| EAN or UPC | 697950083841 |
