Find a Service Center
- 0.5 in Belt Pitch
- 3 in Belt Width
- 20 Number of Teeth
- 3.129 in Outside Diameter
- H Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Bore Range [Min] | 0.5 in |
| Finished Bore | N/A |
| Outside Dia. | 3.129 in |
| Type | KF-1 |
| Bushing Type | Taper-Lock |
| Width Across Teeth | 1.563 in |
| Hub Type | A |
| Pitch Diameter | 3.183 in |
| Belt Pitch | 0.5 in |
| Belt Size | H |
| Belt Width | 3 in |
| Material | Steel |
| Length Through Bore | 1.5 in |
| No. of Teeth | 20 |
| Bushing Series | 1215 |
| Hub Projection | 0.312 in |
| Bore Type | Bushed |
| Bore Range [Max] | 1.25 in |
| Weight | 2.2 LB |
| EAN or UPC | 697950083247 |
