Find a Service Center
- 0.38 in Belt Pitch
- 1 in Belt Width
- 18 Number of Teeth
- 2.119 in Outside Diameter
- L Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Hub Projection | 1/8 in |
| Belt Size | L |
| No. of Teeth | 18 |
| Bore Type | Bushed |
| Length Through Bore | 0.875 in |
| Belt Width | 1 in |
| Bore Range [Max] | 1 in |
| Bushing Type | Taper-Lock |
| Belt Pitch | 0.38 in |
| Outside Dia. | 2.119 in |
| Hub Dia. | 1 5/8 in |
| Pitch Diameter | 2.149 in |
| Width Across Teeth | 0.563 in |
| Material | Steel |
| Bushing Series | 1008 |
| Hub Type | B |
| Type | KF-1 |
| Finished Bore | N/A |
| Bore Range [Min] | 0.5 in |
| Weight | 0.45 LB |
| EAN or UPC | 697950083209 |
