Find a Service Center
- 0.5 in Belt Pitch
- 3 in Belt Width
- 18 Number of Teeth
- 2.811 in Outside Diameter
- H Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Finished Bore | N/A |
| Bore Range [Min] | 0.5 in |
| Hub Projection | 0.812 in |
| Bore Type | Bushed |
| Outside Dia. | 2.811 in |
| Pitch Diameter | 2.865 in |
| Bushing Type | Taper-Lock |
| Belt Pitch | 0.5 in |
| Belt Width | 3 in |
| Length Through Bore | 1.5 in |
| Hub Type | A |
| Width Across Teeth | 2.093 in |
| Type | KF-1 |
| Material | Steel |
| No. of Teeth | 18 |
| Belt Size | H |
| Bore Range [Max] | 1.25 in |
| Bushing Series | 1215 |
| Weight | 1.8 LB |
| EAN or UPC | 697950083186 |
