Find a Service Center
- 0.5 in Belt Pitch
- 3 in Belt Width
- 18 Number of Teeth
- 2.811 in Outside Diameter
- H Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| No. of Teeth | 18 |
| Bushing Type | Taper-Lock |
| Length Through Bore | 1.5 in |
| Material | Steel |
| Bushing Series | 1215 |
| Type | KF-1 |
| Outside Dia. | 2.811 in |
| Hub Type | A |
| Hub Projection | 0.312 in |
| Pitch Diameter | 2.865 in |
| Finished Bore | N/A |
| Belt Pitch | 0.5 in |
| Bore Type | Bushed |
| Belt Size | H |
| Belt Width | 3 in |
| Width Across Teeth | 1.563 in |
| Bore Range [Min] | 0.5 in |
| Bore Range [Max] | 1.25 in |
| Weight | 1.6 LB |
| EAN or UPC | 697950083179 |
