Find a Service Center
- 0.2 in Belt Pitch
- 0.25 and 0.375 in Belt Width
- 36 Number of Teeth
- 2.272 in Outside Diameter
- XL037 Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Bushing Series | N/A |
| Outside Dia. | 2.272 in |
| Hub Type | B |
| Belt Pitch | 0.2 in |
| No. of Teeth | 36 |
| Type | D-1 |
| Hardened Teeth | Without Hardened Teeth |
| Belt Width | 0.25 in, 0.375 in |
| Bushing Type | None |
| Belt Size | XL037 |
| Pitch Diameter | 2.292 in |
| Hub Dia. | 1 1/2 in |
| Hub Projection | 0.218 in |
| No. of Screws | 2 |
| Set Screw Size | 10-24 x 3/16 |
| Bore Type | Bushed |
| Finished Bore | N/A |
| Bore Range [Max] | 1.187 in |
| Material | Steel |
| Bore Range [Min] | 0.312 in |
| Length Through Bore | 1 in |
| Weight | 0.7 LB |
| EAN or UPC | 697950114651 |
