Find a Service Center
- 0.375 in Belt Pitch
- 0.75 in Belt Width
- 32 Number of Teeth
- 3.83 in Outside Diameter
- L075 Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Bushing Series | N/A |
| Length Through Bore | 2 in |
| Bore Range [Min] | 0.625 in |
| No. of Teeth | 32 |
| Hub Dia. | 3.062 in |
| Belt Width | 0.75 in |
| Bore Type | Reborable |
| Hub Projection | 1 in |
| Bushing Type | None |
| Outside Dia. | 3.83 in |
| Bore Range [Max] | 1.875 in |
| Pitch Diameter | 3.82 in |
| Belt Pitch | 0.375 in |
| Hardened Teeth | Without Hardened Teeth |
| Hub Type | B |
| Type | PB |
| Belt Size | L075 |
| Finished Bore | N/A |
| Material | Steel |
| Weight | 3.7 LB |
| EAN or UPC | 697950152035 |
