Find a Service Center
- 0.2 in Belt Pitch
- 0.25 and 0.375 in Belt Width
- 28 Number of Teeth
- 1.763 in Outside Diameter
- XL037 Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
features
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Bore Range [Max] | 15/16 in |
| Hardened Teeth | Without Hardened Teeth |
| Bore Type | Bushed |
| Material | Steel |
| Belt Size | XL |
| Hub Type | B |
| Bore Range [Min] | 1/4 in |
| Bushing Type | None |
| Set Screw Size | 8-32 x 1/8 |
| Length Through Bore | 0.940 in |
| Finished Bore | N/A |
| No. of Screws | 2 |
| Outside Dia. | 1.7630 in |
| Hub Projection | 0.218 in |
| Belt Pitch | 0.200 in |
| Bushing Series | N/A |
| Hub Dia. | 1.187 in |
| Pitch Diameter | 1.783 in |
| Belt Width | 1/4 in, 3/8 in |
| Type | DF-1 |
| No. of Teeth | 28 |
| Weight | 0.34 LB |
| EAN or UPC | 697950112978 |
