Find a Service Center
- 0.375 in Belt Pitch
- 0.75 in Belt Width
- 22 Number of Teeth
- 2.596 in Outside Diameter
- L075 Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Length Through Bore | 1.75 in |
| Belt Pitch | 0.375 in |
| Belt Size | L075 |
| Pitch Diameter | 2.626 in |
| Bore Range [Min] | 0.625 in |
| Belt Width | 0.75 in |
| Hardened Teeth | Without Hardened Teeth |
| Bushing Type | None |
| Bushing Series | N/A |
| Outside Dia. | 2.596 in |
| Bore Type | Reborable |
| Hub Projection | 3/4 in |
| No. of Teeth | 22 |
| Bore Range [Max] | 1.5 in |
| Hub Type | B |
| Hub Dia. | 2 in |
| Type | PB |
| Finished Bore | N/A |
| Material | Steel |
| Weight | 1.8 LB |
| EAN or UPC | 697950151465 |
