Find a Service Center
- 0.375 in Belt Pitch
- 1 in Belt Width
- 20 Number of Teeth
- 2.357 in Outside Diameter
- L100 Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Belt Size | L100 |
| Hardened Teeth | Without Hardened Teeth |
| Bore Type | Reborable |
| Type | PB |
| Belt Width | 1 in |
| Hub Projection | 5/8 in |
| Outside Dia. | 2.357 in |
| Material | Steel |
| Finished Bore | N/A |
| Bore Range [Min] | 0.5 in |
| Pitch Diameter | 2.387 in |
| Hub Dia. | 1.687 in |
| Bore Range [Max] | 1.187 in |
| Bushing Series | N/A |
| Hub Type | B |
| Belt Pitch | 0.375 in |
| No. of Teeth | 20 |
| Bushing Type | None |
| Length Through Bore | 1.875 in |
| Weight | 1.75 LB |
| EAN or UPC | 697950151311 |
