Find a Service Center
- 0.5 in Belt Pitch
- 1.5 in Belt Width
- 20 Number of Teeth
- 3.129 in Outside Diameter
- H150 Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
features
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Finished Bore | N/A |
| Hub Dia. | 2 1/2 in |
| Type | DF-1 |
| Bore Range [Min] | 3/4 in |
| Hardened Teeth | With Hardened Teeth |
| Hub Projection | 7/8 in |
| Bore Type | Reborable |
| No. of Teeth | 20 |
| Length Through Bore | 2.687 in |
| Bushing Type | None |
| Outside Dia. | 3.1290 in |
| Belt Pitch | 1/2 in |
| Bore Range [Max] | 1 5/8 in |
| Material | Steel |
| Belt Size | H |
| Belt Width | 1 1/2 in |
| Hub Type | B |
| Pitch Diameter | 3.183 in |
| Bushing Series | N/A |
| Weight | 4.3 LB |
| EAN or UPC | 697950151236 |
