Find a Service Center
- 0.375 in Belt Pitch
- 0.75 in Belt Width
- 16 Number of Teeth
- 1.88 in Outside Diameter
- L075 Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
caution
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Bushing Type | None |
| Finished Bore | N/A |
| Bore Type | Bushed |
| Pitch Diameter | 1.91 in |
| Bushing Series | N/A |
| Bore Range [Max] | 1.125 in |
| Hub Dia. | 1.437 in |
| Belt Size | L075 |
| Hub Type | B |
| Belt Pitch | 0.375 in |
| Material | Steel |
| No. of Teeth | 16 |
| Length Through Bore | 1.625 in |
| No. of Screws | 1 |
| Type | PB |
| Belt Width | 0.75 in |
| Hub Projection | 5/8 in |
| Bore Range [Min] | 0.5 in |
| Outside Dia. | 1.88 in |
| Set Screw Size | 1/4-20 x 1/4 |
| Hardened Teeth | Without Hardened Teeth |
| Weight | 1.0 LB |
| EAN or UPC | 697950101019 |
