Find a Service Center
- 0.2 in Belt Pitch
- 0.25 and 0.375 in Belt Width
- 12 Number of Teeth
- 0.744 in Outside Diameter
- XL037 Belt Size
description
- Timing pulleys have evenly spaced axial grooves cut in their periphery to make correct, positive engagement with the mating teeth of the belt. These pulleys are designed so that the teeth of the belt enter and leave the grooves with negligible friction. All pulleys, stock and made to order, have minimum tooth-to-groove clearance (backlash). Pulleys are available in a wide range of stock widths and diameters.
features
- Because timing belts have an inherent, gentle side thrust, it is necessary to use at least one flanged pulley to prevent the belt from riding off
| Length Through Bore | 0.781 in |
| Belt Size | XL |
| Belt Width | 1/4 in, 3/8 in |
| Material | Steel |
| Bore Type | Bushed |
| Type | DF-1 |
| Bore Range [Min] | 3/16 in |
| Bushing Type | None |
| Finished Bore | N/A |
| No. of Teeth | 12 |
| Pitch Diameter | 0.764 in |
| No. of Screws | 2 |
| Hub Dia. | 1/2 in |
| Hub Projection | 0.218 in |
| Set Screw Size | 6-32 x 1/8 |
| Bore Range [Max] | 5/16 in |
| Bushing Series | N/A |
| Hub Type | B |
| Hardened Teeth | Without Hardened Teeth |
| Outside Dia. | 0.7440 in |
| Belt Pitch | 0.200 in |
| Weight | 0.06 LB |
| EAN or UPC | 697950095851 |
