Find a Service Center
- 0.38 in Inner Diameter
- 0.63 in Outer Diameter
- 0.88 in Overall Width
features
- -FS" in the suffix for the RC and RCB call out stainless steel springs and are capable of higher operating temperatures and significantly higher engagements per minute
- A polymer spring is standard for the RC and RCB
- A stainless steel spring is standard for the FC, FCS, FCL, FCB and FCBL
- A hardened and machined shaft or an "IR" Inner Ring is required for optimal performance
- A press fit into the housing is required
| Capacity | Standard Capacity |
| Shaft Dia. [Max] | 0.375 in |
| Working Load | 566 lbf |
| Oil Hole | w/o Oil Hole |
| Precision Ground | Yes |
| Tolerance | Iso Class 0 (RBEC 1) |
| I.D. | 3/8 in |
| Shaft Dia. [Min] | 0.3745 in |
| Housing Shoulder Diameter | 0.88 in |
| Radial Internal Clearance Specification | N/A |
| Bore Type | Round Bore, Inch Type |
| Self Aligning | No |
| Housing Bore [Min] | 0.6245 in |
| Enclosure | Open |
| Bearing Design | Roller Clutch |
| No. of Rows | 3 |
| Housing Bore [Max] | 0.6255 in |
| O.D. | 0.625 in |
| Radial Internal Clearance | N/A |
| End Type | Open End |
| Clamp Torque | 45.4 lbf |
| Origin | Roller Clutches |
| Cage Material | Plastic |
| Weight | 0.004 LB |
| EAN or UPC | 605790218545 |
