RC-162110-FS

Single Row Steel Needle Roller Bearing

Item #101742861

Auto Replenish

each One-time purchase

Product Details

Transmits torque between the shaft and the housing in one direction, and allows free overrun in the opposite direction. The patented design utilizes the same low profile and radial section as drawn cup needle roller bearings. The units are compact, light in weight, and operate directly on a hardened shaft.

-FS" in the suffix for the RC and RCB call out stainless steel springs and are capable of higher operating temperatures and significantly higher engagements per minute
A polymer spring is standard for the RC and RCB
A stainless steel spring is standard for the FC, FCS, FCL, FCB and FCBL
A hardened and machined shaft or an "IR" Inner Ring is required for optimal performance
A press fit into the housing is required

Specifications

Operating Temperature [Max]	230 ˚F
Precision Class	ABEC 1
Operating Temperature [Min]	-22 ˚F
Housing Shoulder Diameter	1.9 in
Cage Type	Window
Capacity	Standard Capacity
Origin	Roller Clutches
Oil Hole	w/o Oil Hole
Overall Width	0.63 in, 15.88 mm
Rolling Element	Roller
Lubricant	Rust Preventative
Radial Internal Clearance Specification	N/A
Cage Material	Nylon
Outer Ring Width	0.63 in, 15.88 mm
Series	RC
End Type	Open End
Relubricatable	No
O.D. Type	Straight
Self Aligning	No
Precision Ground	Yes
Mounting Method	Press Fit
Housing Bore [Min]	1.312 in
Relubrication Feature	No
Bearing Material	1014 Steel
Bore Type	Round Bore, Inch Type
Clamp Torque	412 lbf
I.D.	1 in
Radial Internal Clearance	N/A
Component	Assembly
Shaft Dia. [Min]	0.9995 in
Enclosure	Open
O.D.	1.3125 in
Shaft Dia. [Max]	1 in
No. of Rows	1
Housing Bore [Max]	1.313 in
Speed (Max) Oil	8700 rpm
Bearing Design	Roller Clutch
Tolerance	Iso Class 0 (RBEC 1)
Weight	0.007 LB
EAN or UPC	605790193101