Hub City | PB150X1 1/4S | PB150 Series HUB-ALLOY® Pillow Block

PB150X1 1/4S

PB150 Series HUB-ALLOY® Pillow Block

Item #101032756

Hub-Alloy®

Regreasable

Contact Seals

+ Show More

Auto Replenish

each One-time purchase

Product Details

Molded glass fiber reinforced polyamide retainer
Grade 10 balls
Races and balls are 52100 steel, hardened, ground, and honed for quiet operation
Slotted bolt holes
Rugged cast iron or Hub-Alloy® housing
Zone-hardened inner race
Prelubricated with high quality lithium grease. 1/4-28 Zerk fitting provided to allow for relube
Choice of narrow or wide inner race, setscrew locking or eccentric collar locking, normal-duty, or medium-duty bearings
Knurled cup point setscrews at 120° to minimize inner ring distortion
Recessed housing base to accommodate uneven mounting surfaces
Spherical outer race to allow up to 1.5° misalignment
All bearings have single lip Nitrile rubber seals with steel trash guard
Steel fingers are standard on wide inner race bearings only

Specifications

Housing Construction	1 Piece
Base Width	1 5/16 in
Mounted Unit Duty	Light-Duty
Temperature Range [Max]	225 °F
Seal Type	Contact Seals
Bolt Hole Spacing Range [Min]	4 7/16 in
Lubrication	Relubricatable
Bolt Hole Spacing Range [Max]	5 in
Locking Device	Setscrew Locking Collar
Series	PB150
Bearing Insert	B250X1 1/4S
Bolt Holes	2
Housing Width	1 5/16 in
Bolt Hole Spacing	4 23/32 in
Housing Material	Hub-Alloy®
Temperature Range [Min]	-25 °F
Misalignment Range	±1 1/2°
Base Length	5 15/16 in
Inch/Metric	Inch
Length Through Bore	1.22 in
Overall Width	1 33/64 in
Base Height	13/32 in
Housing Height	3 5/32 in
Center of Bearing to Front of Inner Ring	0.866 in
End Type	Open End
Bearing Type	Ball Bearing
Pillow Block Type	Thru-Bolt
Shaft Dia.	1.25 in
Collar O.D.	1.563 in
Bearing Design	Non-Expansion
Insert Type	Steel Insert
Bolt Size	1/2 in
Weight	2.0 LB
EAN or UPC	662798247205

PB150X1 1/4S