- Angular Contact Bearing Type
- 25 mm Inner Diameter
- 52 mm Outer Diameter
- 20.6 mm Width
description
- Double row angular contact ball bearings are units with solid inner and outer rings and ball and cage assemblies with polyamide, sheet steel or brass cages. They are similar in design to single row angular contact ball bearings in pairs in an O arrangement, but offer a narrower design. They differ in the size of their contact angle and in the design of the bearing rings. Sealed versions are maintenance-free and, as a result, allow particularly economical bearing arrangements.
applications
- Fluid pumps
- Compressors
- Gearboxes
- Elevators
- Packaging equipment
- Motorcycles
- Machine tools
- Textile machines
features
- Improved raceway surfaces and ball quality
- Innovative steel cage design
- 30° contact angle
- P6 manufacturing tolerance for optimized waviness, roughness and roundness
- New Z dust shield
- Double sealed/shielded versions filled with grease on both sides
- Lower total cost of ownership (TCO)
- Generates less noise and less heat
- Suitable for higher loads (especially under axial loads)
- More energy efficient
- Longer operating life
- Extended grease life
- Innovative light contact HRS seal (axial contact to the inner ring)
| Seal Material | Acrylonitrile-Butadiene Elastomer |
| Corner Radius [Min] | 1 mm |
| Lubrication | Fuchs Renolit GA3 |
| Radial Internal Clearance | Normal |
| I.D. | 25 mm |
| Enclosure | Double Sealed |
| Bore Type | Round Bore |
| Width | 20.600 mm |
| Dynamic Load Rating | 22000 N |
| Rows of Balls | Double |
| Bearing Type | Angular Contact |
| Static Load Rating [Max] | 15200 N |
| O.D. | 52 mm |
| Radial Internal Clearance Specification | Normal Clearance |
| Cage Material | Steel |
| Cone Corner Radius | 1 mm |
| Temperature Range [Max] | 248 °F |
| Limiting Speed - Oil | 10700 rpm |
| Inch/Metric | Metric |
| Contact Angle | 30° |
| Snap Ring | No Snap Ring |
| Temperature Range [Min] | -68 °F |
| Weight | 0.41 LB |
| EAN or UPC | 4054366900883 |

