Find a Service Center
Alternate Products
- 55 mm Shaft, 61.91 mm Base to Center, Contact Seals, Setscrew Locking, Non-Expansion Type
description
- Created to handle stringent food handling requirements and serve in highly corrosive applications. All assembly components have been carefully selected to comply with all applicable federal food processing requirements without compromising bearing performance needs. These units are dimensionally stable under load and can operate in continuous temperatures up to 250 °F (brief exposure up to 350 °F).The finish will not scrape or flake off during use.
applications
- Agriculture
- Fans and blowers
- Food processing
- Conveyors
| Bolt Hole Spacing | 176.2 mm |
| Insert Type | Steel Insert |
| Collar O.D. | 69.77 mm |
| End Type | Open End |
| Bolt Hole Spacing Range [Max] | 205.6000 mm |
| Base Height | 19 mm |
| Base Length | 222.3 mm |
| Base Width | 58.7 mm |
| Mounted Unit Duty | Normal-Duty |
| Bolt Hole Spacing Range [Min] | 146.9 |
| Series | YAK Series |
| Length Through Bore | 55.6 mm |
| Inch/Metric | Metric |
| Housing Height | 124.6 mm |
| Housing Material | Cast Iron |
| Bearing Design | Non-Expansion |
| Shaft Dia. | 55 mm |
| Pillow Block Type | Thru-Bolt |
| Housing Construction | 1 Piece |
| Bearing Insert | GYE55KRRB |
| Bolt Size | M16 |
| Overall Width | 61.91 mm |
| Bolt Holes | 2 |
| Bearing Type | Ball Bearing |
| Locking Device | Setscrew Locking Collar |
| Lubrication | Relubricatable |
| Seal Type | Contact Seals |
| Weight | 7.64 LB |
| EAN or UPC | 87796169906 |
