
- 2" Shaft, 2.4375" Base to Center, Contact Seals, Setscrew Locking, Non-Expansion Type
description
- Created to handle stringent food handling requirements and serve in highly corrosive applications. All assembly components have been carefully selected to comply with all applicable federal food processing requirements without compromising bearing performance needs. These units are dimensionally stable under load and can operate in continuous temperatures up to 250 °F (brief exposure up to 350 °F).The finish will not scrape or flake off during use.
applications
- Agriculture
- Fans and blowers
- Food processing
- Conveyors
Length Through Bore | 2.1875 in |
Collar O.D. | 2.747 in |
Bolt Hole Spacing | 6 15/16 in |
Housing Material | Cast Iron |
Base Length | 8 3/4 in |
Bearing Design | Non-Expansion |
End Type | Open End |
Bolt Size | 5/8 in |
Dynamic Load Rating | 10800 lbf |
Bearing Insert | GY1200KRRB |
Overall Width | 2 7/16 in |
Bearing Type | Ball Bearing |
Bolt Hole Spacing Range [Min] | 5 25/32 in |
Base Height | 3/4 in |
Housing Height | 4 29/32 in |
Base Width | 2 5/16 in |
Shaft Dia. | 2 in |
Seal Type | Contact Seals |
Bolt Hole Spacing Range [Max] | 8 3/32 in |
Bolt Holes | 2 |
Pillow Block Type | Thru-Bolt |
Lubrication | Relubricatable |
Locking Device | Setscrew Locking Collar |
Inch/Metric | Inch |
Collar No. | N/A |
Mounted Unit Duty | Normal-Duty |
Series | YAK Series |
Insert Type | Steel Insert |
Housing Construction | 1 Piece |
Weight | 8.056 LB |
EAN or UPC | 87796157583 |
