Find a Service Center
Alternate Products
- 2.9375" Shaft, 3.3125" Base to Center, Contact Seals, Setscrew Locking, Non-Expansion Type
description
- Created to handle stringent food handling requirements and serve in highly corrosive applications. All assembly components have been carefully selected to comply with all applicable federal food processing requirements without compromising bearing performance needs. These units are dimensionally stable under load and can operate in continuous temperatures up to 250 °F (brief exposure up to 350 °F).The finish will not scrape or flake off during use.
applications
- Fans and blowers
- Food processing
- Conveyors
- Agriculture
| Base Length | 12 in |
| Length Through Bore | 3.0625 in |
| Insert Type | Steel Insert |
| Shaft Dia. | 2.9375 in |
| Collar O.D. | 3.619 in |
| Seal Type | Contact Seals |
| Bolt Holes | 2 |
| Mounted Unit Duty | Normal-Duty |
| Bearing Design | Non-Expansion |
| Bolt Hole Spacing Range [Max] | 10 3/4 in |
| End Type | Open End |
| Inch/Metric | Inch |
| Base Width | 3 1/4 in |
| Locking Device | Setscrew Locking Collar |
| Lubrication | Relubricatable |
| Housing Material | Cast Iron |
| Housing Construction | 1 Piece |
| Bearing Type | Ball Bearing |
| Overall Width | 3 3/8 in |
| Base Height | 1 1/2 in |
| Series | YAK Series |
| Bolt Hole Spacing Range [Min] | 8 1/4 in |
| Bolt Size | 3/4 in |
| Bearing Insert | GY1215KRRB |
| Pillow Block Type | Thru-Bolt |
| Bolt Hole Spacing | 9 1/2 in |
| Housing Height | 6 7/16 in |
| Weight | 19.25 LB |
| EAN or UPC | 87796157637 |
