Find a Service Center
- 2.1875" Shaft, 3.75" Base to Center, Cast Iron Housing, 2-Bolt Pillow Block, Contact Seals, Eccentric Collar
description
- Fafnir RSAO and LSAO type pillow blocks are equipped with GN-KRRB wide inner ring ball bearings, and the LSA series is equipped with GN-KLLB wide inner ring bearings. They are ideally suited for installations where the load is heavy inproportion to the shaft diameter or where considerable shock loads exist. These pillow blocks are prelubricated and ready for immediate use. For wet or extremely dirty conditions, a grease fitting is provided for relubrication if required. All units are supplied with a self-locking collar.
applications
- Agriculture
- Fans and blowers
- Food processing
- Conveyors
| Shaft Dia. | 2.1875 in |
| Base Width | 3 1/2 in |
| Housing Construction | 1 Piece |
| Bearing Type | Ball Bearing |
| Base Height | 1 7/16 in |
| Bolt Hole Spacing | 10 1/4 in |
| Bearing Insert | GN203KRRB |
| Pillow Block Type | Thru-Bolt |
| Mounted Unit Duty | Heavy-Duty |
| Locking Device | Eccentric Locking Collar |
| End Type | Open End |
| Bearing Design | Non-Expansion |
| Inch/Metric | Inch |
| Seal Type | Contact Seals |
| Bolt Holes | 2 |
| Base Length | 12 5/8 in |
| Bolt Hole Length | 1 3/8 in |
| Lubrication | Relubricatable |
| Collar No. | SN203K |
| Housing Material | Cast Iron |
| Insert Type | Steel Insert |
| Bolt Hole Width | 7/8 in |
| Weight | 20.37 LB |
| EAN or UPC | 87796061330 |
