Find a Service Center
- Single Row Angular Contact Bearing, 100 mm ID x 180 mm OD x 34 mm Wide, Open, Standard Precision (ABEC 1), Brass / Bronze Cage, Greater Than Normal Clearance (C3), 40° Contact Angle
description
- The angular contact light 7200WN series is dimensionally interchangeable with the radial 200 series.The features of the 7000WN series include a refined bore diameter. A single bearing is recommended for applications in which the thrust load is in one direction or, in the case of combined loads, the thrust load is high in relation to the radial load. A duplex pair is recommended for application where thrust ispresent in both directions or where axialdisplacement of the shaft must be restricted.For exceptionally high thrust loads in one direction, a tandem pair can be utilized opposed by a third bearing. Sizes 7201K through 7203WN have a 20° contact angle and a nylon cage. Sizes 7204WN through 7218WN have a 40° contact angle and a one-piece, ball piloted, pressed brass cage.Larger sizes 7219WN through 7230WN have a 40° contact angle and a one-piece, outer ring piloted high-strength machined bronze cage.
applications
- General industrial
- Agricultural
- Chemical
- Utilities
| Fillet Radius | 0.079 in |
| Material | Steel |
| Locking Device | No Locking Device |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Seal Material | None |
| Lubricant | Oil Preservative |
| Precision | Standard |
| Static Load Rating [Max] | 25500 lbf |
| Cage Material | Brass/Bronze |
| O.D. | 180 mm |
| Inner Ring Width | 34 mm |
| Cage Type | Metal |
| Preload Level | None |
| Capacity | Standard Capacity |
| Snap Ring | No Snap Ring |
| Inch/Metric | Metric Bore |
| Dynamic Load Rating | 33500 lbf |
| No. in Set | Single Bearing |
| Origin | Single Row Angular Contact |
| Ball Material | Steel |
| Precision Level | Standard (ABEC 1) |
| icNumber | 7695860 |
| Internal Design | Universal Mounting |
| Bore Type | Round Bore |
| Radial Internal Clearance | C3 |
| Contact Angle | 40° |
| I.D. | 100 mm |
| Bearing Type | Angular Contact |
| Rows of Balls | Single |
| Outer Ring Width | 34 mm |
| Seal Type | Unsealed |
| O.D. Type | Straight |
| Enclosure | Open |
| Weight | 7.62 LB |
| EAN or UPC | 87796074286 |
