Find a Service Center
- 7/8" Pitch
- XH Belt Type
- 3" Belt Width
- 32 Teeth
- 8.913" Pitch Diameter
features
- Nonslip
- No lubrication required
- Minimum backlash
- Constant speed
caution
- It is necessary to use a minimum of one flanged pulley to prevent the belt from riding off
- When the drive is operated on other than horizontal shafts, or when the center distance is greater than eight times the diameter of the smaller pulley on drive ratios less than 3:1, both pulleys should be flanged
- When a drive has three pulleys, at least two should be flanged
- If the drive has more than three pulleys, every other pulley should be flanged
| Bore Range [Min] | 1.1875 in |
| Bushing Series | 3535 |
| Hub Dia. | N/A |
| Outside Dia. | 8.803 in |
| No. of Teeth | 32 |
| Finished Bore | N/A |
| Bore Type | Taper-Lock and QD Bushed |
| Belt Width | 3 in |
| Belt Pitch | 0.875 in |
| Belt Size | XH |
| Pitch Diameter | 8.913 in |
| Length Through Bore | 3.5 in |
| Hub Projection | 0.13 in |
| Bore Range [Max] | 3.5 in |
| Type | KF-1 |
| Bushing Type | Taperlock |
| Weight | 38.25 LB |
| EAN or UPC | 782475089017 |
