Find a Service Center
- 1/2" Pitch
- H Belt Size
- 1" Belt Width
- 24 Teeth
- 3.820" Pitch Diameter
applications
- Agitators and mixers
- Compressors
- Conveyors
- Fans and blowers
- Paper machinery
- Pumps
features
- Nonslip
- No lubrication required
- Minimum backlash
- Constant speed
caution
- It is necessary to use a minimum of one flanged pulley to prevent the belt from riding off
- When the drive is operated on other than horizontal shafts, or when the center distance is greater than eight times the diameter of the smaller pulley on drive ratios less than 3:1, both pulleys should be flanged
- When a drive has three pulleys, at least two should be flanged
- If the drive has more than three pulleys, every other pulley should be flanged
| Bushing Type | None |
| Hub Projection | 1 in |
| Bore Range [Max] | 1.875 in |
| Pitch Diameter | 3.82 in |
| Bore Type | Reborable |
| Length Through Bore | 2.25 in |
| Finished Bore | N/A |
| Belt Pitch | 0.5 in |
| Belt Size | H |
| No. of Teeth | 24 |
| Bushing Series | N/A |
| Outside Dia. | 3.766 in |
| Hub Dia. | 3 in |
| Type | DF-1 |
| Belt Width | 1 in |
| Bore Range [Min] | 0.75 in |
| Weight | 5.6 LB |
| EAN or UPC | 782475422586 |
