Find a Service Center
- 1/5" Pitch
- XL Belt Size
- 3/8" or 1/4" Belt Width
- 15 Teeth
- 0.955" Pitch Diameter
applications
- Agitators and mixers
- Compressors
- Conveyors
- Fans and blowers
- Paper machinery
- Pumps
features
- Nonslip
- No lubrication required
- Minimum backlash
- Constant speed
caution
- When the drive is operated on other than horizontal shafts, or when the center distance is greater than eight times the diameter of the smaller pulley on drive ratios less than 3:1, both pulleys should be flanged
- When a drive has three pulleys, at least two should be flanged
- If the drive has more than three pulleys, every other pulley should be flanged
- It is necessary to use a minimum of one flanged pulley to prevent the belt from riding off
| No. of Teeth | 15 |
| Belt Pitch | 0.2 in |
| Bore Type | Reborable |
| Finished Bore | N/A |
| Belt Size | XL |
| Bore Range [Max] | 0.3125 in |
| Hub Projection | 1/4 in |
| Outside Dia. | 0.935 in |
| Length Through Bore | 0.78 in |
| Bushing Series | N/A |
| Belt Width | 0.375 in, 0.25 in |
| Type | DF-1 |
| Bushing Type | None |
| Bore Range [Min] | 0.25 in |
| Hub Dia. | 0.63 in |
| Pitch Diameter | 0.955 in |
| Weight | 0.14 LB |
| EAN or UPC | 782475087747 |
