Find a Service Center
- 3/8" Pitch
- L Belt Size
- 1/2" Belt Width
- 10 Teeth
- 1.194" Pitch Diameter
applications
- Agitators and mixers
- Compressors
- Conveyors
- Fans and blowers
- Paper machinery
- Pumps
features
- Nonslip
- No lubrication required
- Minimum backlash
- Constant speed
caution
- It is necessary to use a minimum of one flanged pulley to prevent the belt from riding off
- When the drive is operated on other than horizontal shafts, or when the center distance is greater than eight times the diameter of the smaller pulley on drive ratios less than 3:1, both pulleys should be flanged
- When a drive has three pulleys, at least two should be flanged
- If the drive has more than three pulleys, every other pulley should be flanged
| Bore Range [Min] | 0.375 in |
| Bushing Type | None |
| Type | DF-1 |
| Belt Pitch | 0.375 in |
| Length Through Bore | 1.25 in |
| Finished Bore | N/A |
| Belt Size | L |
| Hub Projection | 1/2 in |
| Pitch Diameter | 1.194 in |
| Bore Type | Reborable |
| Outside Dia. | 1.164 in |
| Belt Width | 0.5 in |
| Hub Dia. | 0.81 in |
| Bushing Series | N/A |
| No. of Teeth | 10 |
| Bore Range [Max] | 0.5 in |
| Weight | 0.26 LB |
| EAN or UPC | 782475087914 |
