Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 7/8-14 UNF SAE O-Ring Port
- 22.6 Cubic Inch Displacement Per Rev
description
- Geroler motors are similar in design to the geroter motor, but feature better low-speed performance characteristics and higher overall efficiency.They can generate up to 15 hp.Motors with the Geroler element provide high starting and running torque as well.By minimizing friction, the Geroler element helps to increase efficiency while providing smooth output shaft rotation even at very low speeds.
applications
- Agricultural augers, Harvesters, Seeders, Railroad maintenance equipment
features
- Speed up to 1,150 rpm
- Compact size
- Provides high efficiency, even at start-up and low speeds
- Motor shaft rotation can instantly be reversed by changing direction of input/output flow while generating equal torque in either direction
options
- SAE ports
- Splined and tapered shafts
| Inlet Pressure [Max] | 2500 psi |
| Maximum Speed @ Continuous Flow | 153 rpm @ 15 gal/min |
| Pilot Diameter | 3.25 in |
| Port Size & Location | SAE-10 Side |
| Material | Cast Iron |
| Shaft Type | Straight w/ Woodruff Key |
| Seal Material | Buna-N |
| Special Features Hardware Code | 00 |
| Special Features | None |
| Paint Code | A |
| Flow Rate | 15 gal/min |
| Motor Element | Gerotor |
| Series | S Series |
| Motor Type | Spool Valve |
| Flow [Max] | 15 gal/min |
| Pressure [Max] | 1300 psi |
| Corrosion Resistant | No |
| Duty | Standard-Duty |
| Port Size | SAE-10, 7/8-14 UNF |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| RPM [Min] | 153 rpm |
| Mounting Type Code | REF! |
| Rotation | Standard Rotation |
| Displacement (in³/rev) | 22.6 |
| Output Torque at Rated PSI (inch/pounds) | 4672 in lb |
| Flange Orientation | Standard |
| Port Location | Side Port |
| Mount Type | 2 Bolt |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Output Shaft Code | 01 |
| Case Drain | 0.4375-20 UNF-2B SAE O-Ring Port (End Cap) |
| Port Type | SAE O-Ring |
| Port Code | A |
| Splines | 0 |
| Special Features Assembly Code | 0 |
| Case Drain Code | 1 |
| RPM [Max] | 153 rpm |
| Mounting Holes | 0.535 in |
| Bolt Circle Dia. | 4.19 in |
| Mounting Hole Size | 0.535 in |
| Weight | 1.0 LB |
