Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 5/16-18 UNC-2B Manifold Port
- 5.86 Cubic Inch Displacement Per Rev
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Case Drain | None |
| Motor Type | Spool Valve |
| Paint Code | A |
| Material | Cast Iron |
| Pilot Diameter | 3.25 in |
| Shaft Type | Straight w/ Woodruff Key |
| Port Code | C |
| Mount Type | 2 Bolt |
| Displacement (in³/rev) | 5.86 |
| Port Size | Manifold, 5/16-18 UNC Threads, 5/16-18 UNC-2B |
| Paint/Packaging | Primer Low Gloss Black, Individual Box |
| Output Torque at Rated PSI (inch/pounds) | 1372 in lb |
| Mounting Hole Size | 0.565 in |
| Special Features Assembly Code | 0 |
| Seal Material | High Pressure |
| Motor Element | Gerotor |
| Special Features Hardware Code | DS |
| Corrosion Resistant | No |
| Series | H Series |
| Rotation | Standard Rotation |
| Mounting Type Code | A |
| Special Features | None |
| Bolt Circle Dia. | 4.187 in |
| Pressure [Max] | 1800 psi |
| Duty | Standard-Duty |
| Flange Orientation | Standard |
| Port Type | Manifold |
| Inlet Pressure [Max] | 2500 psi |
| Flow Rate | 14 gal/min |
| Port Location | Side Port |
| Mounting Holes | 0.535 in |
| Output Shaft Code | 01 |
| Maximum Speed @ Continuous Flow | 585 rpm @ 15 gal/min |
| Case Drain Code | 0 |
| Splines | 0 |
| Flow [Max] | 15 gal/min |
| RPM [Max] | 585 rpm |
| Weight | 13.0 LB |
