Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 1/2-14 NPTF Port
- 22.58 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Case Drain | None |
| Paint/Packaging | Primer Low Gloss Black, Individual Box |
| Mount Type | 2 Bolt |
| Port Size & Location | 1/2 in NPTF Side |
| Series | H Series |
| Corrosion Resistant | No |
| Seal Material | Buna-N |
| Port Size | 1/2, 1/2-14 |
| Flow [Max] | 15 gal/min |
| RPM [Max] | 152 rpm |
| Speed Sensor Options | Digital Speed Pickup (15 Pulse), 127 [5.0] Lead Wire With Packard Weather Pac Shroud Connector (A=Power, B=Signal, C=Common) |
| Pressure [Max] | 1250 psi |
| Output Torque at Rated PSI (inch/pounds) | 3602 in lb |
| Bolt Circle Dia. | 4.187 in |
| Special Features Hardware Code | BZ |
| Port Type | NPTF |
| RPM [Min] | 152 rpm |
| Rotation | Standard Rotation |
| Motor Type | Spool Valve |
| Case Drain Code | 0 |
| Inlet Pressure [Max] | 2500 psi |
| Material | Cast Iron |
| Special Features | Speed Sensor |
| Output Shaft Code | 01 |
| Flange Orientation | Standard |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Shaft Type | Straight w/ Woodruff Key |
| Motor Element | Gerotor |
| Pilot Diameter | 3.25 in |
| Mounting Hole Size | 0.565 in |
| Splines | 0 |
| Mounting Holes | 0.535 in |
| Special Features Assembly Code | 0 |
| Mounting Type Code | A |
| Maximum Speed @ Continuous Flow | 152 rpm @ 15 gal/min |
| Duty | Standard-Duty |
| Displacement (in³/rev) | 22.58 |
| Flow Rate | 14 gal/min |
| Port Location | Side Port |
| Paint Code | A |
| Port Code | B |
| Weight | 13.0 LB |
