Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 7/8-14 UNF-2B SAE O-Ring Port
- 5.86 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Mounting Holes | 0.535 in |
| Flange Orientation | Standard |
| Bolt Circle Dia. | 4.187 in |
| Output Shaft Code | 01 |
| Flow Rate | 14 gal/min |
| Special Features | None |
| Port Code | A |
| Port Location | Side Port |
| Pressure [Max] | 1800 psi |
| Port Type | SAE O-Ring |
| Motor Element | Gerotor |
| Special Features Hardware Code | 00 |
| Port Size | SAE-10, 7/8-14 UNF-2B |
| Pilot Diameter | 3.25 in |
| Seal Material | Buna-N |
| Maximum Speed @ Continuous Flow | 585 rpm @ 15 gal/min |
| Paint/Packaging | Primer Low Gloss Black, Individual Box |
| Inlet Pressure [Max] | 2500 psi |
| Motor Type | Spool Valve |
| Mounting Type Code | A |
| Duty | Standard-Duty |
| Shaft Type | Straight w/ Woodruff Key |
| Case Drain | 0.4375-20 UNF-2B SAE O-Ring Port (End Cap) |
| Series | H Series |
| Flow [Max] | 15 gal/min |
| RPM [Max] | 585 rpm |
| Material | Cast Iron |
| Case Drain Code | 1 |
| Paint Code | A |
| Output Torque at Rated PSI (inch/pounds) | 1372 in lb |
| Port Size & Location | SAE-10 Side |
| Rotation | Standard Rotation |
| Mount Type | 2 Bolt |
| Splines | 0 |
| Corrosion Resistant | No |
| Special Features Assembly Code | 0 |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| RPM [Min] | 585 rpm |
| Mounting Hole Size | 0.565 in |
| Displacement (in³/rev) | 5.86 |
| Weight | 13.0 LB |
