Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 1/2-14 NPTF Port
- 2.81 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Series | H Series |
| Displacement (in³/rev) | 2.81 |
| Case Drain Code | 0 |
| Shaft Type | Straight w/ Woodruff Key, Corrosion Resistant |
| Special Features Assembly Code | 0 |
| Shaft Options | Nickel Plated |
| Special Features Hardware Code | 00 |
| Pilot Diameter | 1.75 in |
| Port Size & Location | 1/2 in NPTF Side |
| Port Size | 1/2, 1/2-14 |
| Rotation | Standard Rotation |
| Seal Material | Buna-N |
| Pressure [Max] | 1800 psi |
| Bolt Circle Dia. | 3 1/4 in |
| Flange Orientation | Standard |
| Paint/Packaging | Environmental Coated Gloss White, Individual Box |
| RPM [Max] | 969 rpm |
| Flow Rate | 11.25 gal/min |
| Case Drain | None |
| Material | Cast Iron |
| Motor Element | Gerotor |
| Mounting Holes | 3/8-16 |
| Port Code | B |
| Motor Type | Spool Valve |
| Flow [Max] | 12 gal/min |
| Paint Code | D |
| Special Features | None |
| Mounting Type Code | B |
| Inlet Pressure [Max] | 2500 psi |
| Mounting Hole Size | 3/8 in |
| Corrosion Resistant | Yes |
| Output Torque at Rated PSI (inch/pounds) | 646 in lb |
| Duty | Corrosion Resistant-Duty |
| Shaft Size & Type | Straight |
| Splines | 0 |
| Maximum Speed @ Continuous Flow | 969 rpm @ 12 gal/min |
| Output Shaft Code | 27 |
| Mount Type | 4 Bolt |
| Port Location | Side Port |
| Port Type | NPTF |
| Weight | 11.2 LB |
