Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 5/16-18 UNC Manifold Port
- 3.5 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Motor Element | Gerotor |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Special Features Assembly Code | 0 |
| Port Code | C |
| Flow Rate | 15 gal/min |
| Mounting Hole Size | 3/8 in |
| Output Shaft Code | 07 |
| Inlet Pressure [Max] | 2500 psi |
| Shaft Size & Type | Straight |
| Output Torque at Rated PSI (inch/pounds) | 802 in lb |
| Case Drain | None |
| Bolt Circle Dia. | 3 1/4 in |
| Case Drain Code | 0 |
| Seal Material | Buna-N |
| Displacement (in³/rev) | 3.5 |
| Flow [Max] | 15 gal/min |
| Port Type | Manifold |
| Paint Code | A |
| Port Size | Manifold, 5/16-18 UNC Threads, 5/16-18 UNC |
| Maximum Speed @ Continuous Flow | 953 rpm @ 15 gal/min |
| Pilot Diameter | 1.75 in |
| Duty | Standard-Duty |
| Rotation | Standard Rotation |
| RPM [Max] | 953 rpm |
| Splines | 0 |
| Material | Cast Iron |
| Mounting Type Code | B |
| Corrosion Resistant | No |
| Series | H Series |
| RPM [Min] | 953 rpm |
| Special Features | Free Running Gerotor |
| Mount Type | 4 Bolt |
| Port Location | Side Port |
| Motor Type | Spool Valve |
| Special Features Hardware Code | AA |
| Flange Orientation | Standard |
| Mounting Holes | 3/8-16 |
| Shaft Type | Straight w/ Cross Hole |
| Pressure [Max] | 1800 psi |
| Weight | 11.5 LB |
