Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 5/16-18 UNC Manifold Port
- 7.3 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Rotation | Standard Rotation |
| Mounting Hole Size | 3/8 in |
| Case Drain Code | 0 |
| Duty | Standard-Duty |
| Corrosion Resistant | No |
| Splines | 0 |
| Motor Element | Gerotor |
| Shaft Type | Straight w/ Woodruff Key |
| Case Drain | None |
| Motor Type | Spool Valve |
| Pilot Diameter | 1.75 in |
| Series | H Series |
| Pressure [Max] | 1800 psi |
| Port Code | C |
| Mount Type | 4 Bolt |
| Inlet Pressure [Max] | 2500 psi |
| Seal Material | Buna-N |
| Special Features Assembly Code | 0 |
| Port Location | Side Port |
| Port Type | Manifold |
| Displacement (in³/rev) | 7.3 |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Special Features | None |
| Material | Cast Iron |
| Port Size | Manifold, 5/16-18 UNC Threads, 5/16-18 UNC |
| RPM [Min] | 469 rpm |
| RPM [Max] | 469 rpm |
| Output Torque at Rated PSI (inch/pounds) | 1699 in lb |
| Paint Code | A |
| Mounting Holes | 3/8-16 |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Maximum Speed @ Continuous Flow | 469 rpm @ 15 gal/min |
| Special Features Hardware Code | 00 |
| Output Shaft Code | 01 |
| Flow [Max] | 15 gal/min |
| Bolt Circle Dia. | 3 1/4 in |
| Flow Rate | 15 gal/min |
| Flange Orientation | Standard |
| Mounting Type Code | B |
| Weight | 12.1 LB |
