Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 5/16-18 UNC Manifold Port
- 2.2 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Pressure [Max] | 1800 psi |
| Splines | 0 |
| Corrosion Resistant | No |
| Inlet Pressure [Max] | 2500 psi |
| Special Features Hardware Code | AA |
| Pilot Diameter | 1.75 in |
| Port Location | Side Port |
| Paint/Packaging | Low Gloss Black, Individual Box |
| RPM [Max] | 1021 rpm |
| Series | H Series |
| Mounting Type Code | B |
| Special Features Assembly Code | 0 |
| Mount Type | 4 Bolt |
| Geroter/Geroler Options | Free Running |
| Special Features | Free Running Gerotor |
| Seal Material | Buna-N |
| Motor Element | Gerotor |
| RPM [Min] | 1021 rpm |
| Mounting Hole Size | 3/8 in |
| Case Drain Code | 0 |
| Mounting Holes | 3/8-16 |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Duty | Standard-Duty |
| Paint Code | A |
| Displacement (in³/rev) | 2.2 |
| Output Shaft Code | 01 |
| Port Size | Manifold, 5/16-18 UNC Threads, 5/16-18 UNC |
| Case Drain | None |
| Port Code | C |
| Flow [Max] | 10 gal/min |
| Output Torque at Rated PSI (inch/pounds) | 495.64 in lb |
| Bolt Circle Dia. | 3 1/4 in |
| Maximum Speed @ Continuous Flow | 1021 rpm @ 10 gal/min |
| Flange Orientation | Standard |
| Motor Type | Spool Valve |
| Material | Cast Iron |
| Shaft Type | Straight w/ Woodruff Key |
| Rotation | Standard Rotation |
| Flow Rate | 10 gal/min |
| Port Type | Manifold |
| Weight | 11.2 LB |
