Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 5/16-18 UNC-2B Manifold Port
- 2.2 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Port Type | Manifold |
| Mounting Hole Size | 0.565 in |
| Special Features Hardware Code | AA |
| Port Size | Manifold, 5/16-18 UNC Threads, 5/16-18 UNC-2B |
| Shaft Type | Splined |
| RPM [Min] | 1021 rpm |
| Duty | Standard-Duty |
| Special Features | Free Running Gerotor |
| Special Features Assembly Code | 0 |
| Motor Element | Gerotor |
| Pressure [Max] | 1800 psi |
| Series | H Series |
| Shaft Size & Type | 1 in - 6T Spline |
| Bolt Circle Dia. | 4.187 in |
| Flow Rate | 9.5 gal/min |
| Mounting Holes | 0.535 in |
| Geroter/Geroler Options | Free Running |
| Maximum Speed @ Continuous Flow | 1021 rpm @ 10 gal/min |
| Material | Cast Iron |
| Output Torque at Rated PSI (inch/pounds) | 496 in lb |
| Port Code | C |
| Corrosion Resistant | No |
| Mount Type | 2 Bolt |
| Output Shaft Code | 02 |
| Pilot Diameter | 3.25 in |
| Splines | 6 |
| Mounting Type Code | A |
| Port Location | Side Port |
| Seal Material | Buna-N |
| Flow [Max] | 10 gal/min |
| Motor Type | Spool Valve |
| Paint/Packaging | Primer Low Gloss Black, Individual Box |
| Case Drain | None |
| Case Drain Code | 0 |
| Inlet Pressure [Max] | 2500 psi |
| Flange Orientation | Standard |
| Displacement (in³/rev) | 2.2 |
| Rotation | Standard Rotation |
| Paint Code | A |
| RPM [Max] | 1021 rpm |
| Weight | 11.2 LB |
