Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- G 1/2 BSPP Port
- 22.58 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Paint Code | A |
| Material | Cast Iron |
| Port Code | E |
| Special Features Assembly Code | 0 |
| Mounting Holes | 0.535 in |
| Mount Type | 2 Bolt |
| Special Features | None |
| Corrosion Resistant | No |
| Special Features Hardware Code | 00 |
| Output Shaft Code | 24 |
| Splines | 0 |
| Port Type | BSPP |
| Pressure [Max] | 1250 psi |
| Seal Material | Buna-N |
| Maximum Speed @ Continuous Flow | 152 rpm @ 15 gal/min |
| Shaft Size & Type | Straight |
| Output Torque at Rated PSI (inch/pounds) | 3602 in lb |
| RPM [Max] | 152 rpm |
| Pilot Diameter | 3.25 in |
| Flow Rate | 14 gal/min |
| Flow [Max] | 15 gal/min |
| Motor Element | Gerotor |
| Case Drain Code | 2 |
| Series | H Series |
| Port Size | 1/2, G 1/2 |
| Duty | Standard-Duty |
| Displacement (in³/rev) | 22.58 |
| Shaft Type | Straight |
| Case Drain | G 1/4 BSP Straight Thread Port (End Cap) |
| Motor Type | Spool Valve |
| Port Location | Side Port |
| Rotation | Standard Rotation |
| Paint/Packaging | Primer Low Gloss Black, Individual Box |
| Flange Orientation | Standard |
| Bolt Circle Dia. | 4.187 in |
| Inlet Pressure [Max] | 2500 psi |
| Mounting Hole Size | 0.565 in |
| RPM [Min] | 152 rpm |
| Mounting Type Code | A |
| Weight | 13.0 LB |
