Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- G 1/2 BSPP Port
- 5.86 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
| Port Size | 1/2, G 1/2 |
| Maximum Speed @ Continuous Flow | 585 rpm @ 15 gal/min |
| RPM [Max] | 585 rpm |
| Inlet Pressure [Max] | 2500 psi |
| Special Features Hardware Code | 00 |
| Pilot Diameter | 3.25 in |
| Duty | Standard-Duty |
| Port Location | Side Port |
| Shaft Type | Straight |
| Mounting Holes | 0.535 in |
| Bolt Circle Dia. | 4.187 in |
| Splines | 0 |
| Flow [Max] | 15 gal/min |
| Special Features Assembly Code | 0 |
| Corrosion Resistant | No |
| Output Torque at Rated PSI (inch/pounds) | 1372 in lb |
| Port Type | BSPP |
| Mounting Type Code | A |
| RPM [Min] | 585 rpm |
| Case Drain Code | 2 |
| Case Drain | G 1/4 BSP Straight Thread Port (End Cap) |
| Paint/Packaging | Primer Low Gloss Black, Individual Box |
| Mount Type | 2 Bolt |
| Flow Rate | 14 gal/min |
| Displacement (in³/rev) | 5.86 |
| Series | H Series |
| Port Code | E |
| Pressure [Max] | 1800 psi |
| Motor Type | Spool Valve |
| Rotation | Standard Rotation |
| Motor Element | Gerotor |
| Paint Code | A |
| Shaft Size & Type | Straight |
| Mounting Hole Size | 0.565 in |
| Output Shaft Code | 24 |
| Material | Cast Iron |
| Special Features | None |
| Flange Orientation | Standard |
| Seal Material | Buna-N |
| Weight | 13.0 LB |
